It's a toy clothes dryer. Working door and drum included.
If you like it, you will also want the matching washing machine:
http://www.semaker.com/productdetail/10305
My son and I would love to see it in other colors or even painted... so please show me if you print it!
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1 - 0.2 mm
Infill:
20% - 30%
Notes:
Use a brim for the front part. It needs to be plain for assembly.
Assembly
You will need a nail and some glue. Maybe dremel and hammer.
Place the drum in the body
Carefully apply some glue to the front of the body (avoiding the drum!)
Place front on body
Find an appropriate nail (~1mm diameter / 3mm head / 4cm length if using original scale)
place door in hinge and drive the nail through the bottom hole. You will have to lift the door a little to put the nail through it.
If holes are too tight use a dremel. Or just apply brute force with some caution :)
