Print the parts as supplied.
Slot the Antlers into the head Slot.
Slot the head into the Shield.
Cut the legs of a 5mm Flashing LED to 3mm length and solder wires to them.
Feed the wires through the cable trunking from the nose end to the back battery port, slot the LED into Rudolph's nose.
Insert 2x LR41 batteries into the battery port and secure the wires to the battery.
Slot a 6mm magnet into the slot provided at back of the head part (behind the shield).
Place on fridge in cool position , whilst there check inside and help yourself to Xmas turkey or tiramasu with beer or chilled white wine...
