This is a hairy type Christmas Tree and accompanying ornaments, designed to be printable at near the maximum size of the Rostock Max V2. The tree itself is 11.25" (286mm) tall, by 9.85" Ø (250mm).
The tree is designed for PLA with a 0.4mm nozzle printed at 0.3mm layer height. If other settings are used the quality may suffer due to the loops of the branches not generating properly.
The ornaments are designed to be printed on any printer capable of single or dual-color extrusion, and in the case of the snowman, tri-color. Ornaments such as the Christmas lights and bell could also achieve the multi-color effect via a layer pause and filament swap.
The ornaments all include a built in hook which will attach to the loops of any hairy type Christmas tree, the Christmas lights are designed for the first and last light to loop inside the tree "branch" to hold in place.
Any file with the suffix "A" "B" or "C" is designed for multi-color, any without a suffix is intended for single color extrusion.
Files designed for ONLY single color:
Realistic_Tree
5_Point_Star
Tree_Topper
Files designed for 1-2 colors:
10_Point_Star
Bell
Candy_Cane
Chistmas_Lights
Elongated_Sphere
Sphere_Sliced
SphereZig (single color file just called "Sphere")
Files designed for 1-3 Colors (highly recommended as 3)
Snowman
For my print all ornaments were printed on a Prusa MK2 Multi-Material Kit. The tree was printed on a Rostock Max V2. The small "presents" are the wipe blocks used on the multicolor prints on the Prusa MK2MM.
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX v2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
Doesn't Matter
Notes:
0.3 layer height with a 0.4 mm nozzle is required for best performance of the tree.
The ornaments have no such layer height or nozzle requirements. Though the Christmas lights may require some tweaking to get the wire to resolve on larger diameter nozzles/thicker layers. This is slicer dependent.
