by ZygmuntW, published
When you do your Arduino DIY projects, it is good to have a case for them.
This is easy to print case for Arduino UNO or Leonardo.
It is designed to print without support, there are no brigdes as well.
Editable OpenSCAD files:
https://github.com/zygmuntw/3D-Printed-Case-for-Arduino
I printed it on both Leaprog Creatr (0.35mm nozzle) and Prusa i3 (0.3mm nozzle) printers with good results using following setings:
Layer Height - 0.25mm
Perimeter Widht - 0.5mm
You will need 4x Self Tapping POZI CSK screws number 4, 16mm long to put it all together.
