My son saw an image of this and insisted he wanted a Mickey Magic Wand. Not finding anything like it, I decided to try my hand at some simple modeling and this is what I came up with.
Printed out very well and with some post sanding and painting should look very nice.
I plan on adding split versions if you want to print the head or bottom in separate colors
Printer:
Creality CR-10
Rafts:
Yes
Supports:
Yes
Resolution:
.1
Infill:
45
Notes:
I'd recommend printing it with the ears toward the bed. Rafts are recommended for extra support
Infill based on preference. Higher for younger children
OpenSCAD
