Train Bell for my Dad's Train.
I used the bell from the English Church Bell. (Which is a beautiful piece by the way)
I made the frame and the arm for it.
Should be able to scale to whichever train you would use it for.
Printer:
Tevo Little Monster
Rafts:
Yes
Supports:
Yes
Resolution:
.2062
Infill:
15%
Notes:
You will want to rotate this piece on its side to print.
In S3D, press ctrl +L and select the flat side of the lower mount.
It will drop it down to the edge of the bell.
Make sure that the supports sit correctly under all items that need it.
If your printer isnt overhang friendly then you will probably want to add supports inside the bell as well.
I turned on cooling at layer 3 at 60%.
