This is a multipurpose mount for your headphones, phone, and five(5) SD memory cards.
The design was inspired by phil barrenger's "Monster Mouth Headphone Holder".
http://www.semaker.com/productdetail/2749
Thank you for the inspiration, Phil!
This will clamp to your desk or shelf to hold your headphones, a place to wrap your headphone cord and a hole to keep the plug end (1/4" - 3.5mm - 2.5mm), five slots for SD cards, and a phone stand with charger cord slot for easy access to your phone while it's plugged in.
You can print this with an Apple logo, Android logo, or no logo. Your choice, all files are available.
I also supplied a 'quick print' of the threads (male and female) to see if this will work well for your printer. The thread tolerances work well for my printer, but your millage may vary.
Your desk or shelf needs to be at least 1" thick in order to get a good tight grip with the clamp, but if you find yourself coming up short, you can use the "thread_test-body" piece to add an extra .5".
Printer:
GeeeTech i3
Rafts:
No
Supports:
Yes
Infill:
25%
Notes:
25% infill worked well for me.
