Ring-ding-ding-ding!
Due to lack of a flexi model of a Fox, I decided to make one!
My early revisions had individual feet (as seen in picture), but this either printed sloppy or required supports so I removed the individual feet for a better printing durable model as seen in the CAD rendering.
Took about 4 hours to model. If you enjoy Flexi Fox, please consider a donation!
Printer:
FT-5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
15%
Notes:
Parts cooler helps greatly with hinge tolerance and accuracy. If you do not use one, your hinges may stick!
A raft or skirt should be fine.
3 layers top/ bottom thickness, and 2-3 on the sides (I've only done 2)
