This is a Titan from the Command and Conquer game Tiberian Sun. The model is based on the non-printable model from blackrice000. However, this model is fully printable. The model is static except for the head which can turn side to side. If you have suggestions, let me know. This is my first attempt at modeling.
You will need 1 of everything except as noted below
7.5mm pin: 17
15mm pin: 4
Gun pin: 4
Printer:
Anet A8
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
20%
Notes:
All parts were printed with supports active but several probably didn't need them. Definitely need supports on the head pieces and the gun pieces. I had to print the gun pins and the head on a brim to keep them or supports stable.
The pins were designed to be slightly smaller than the opening but depending on your printer, you may need to scale them down just slightly.
All STL files should be in the printing layout I used.
