This is a remix and chop up of the T800 CPU with a cutout so you can put a USB drive in it. You will need a similar dimension USB drive that has an inner board length of 31mm. Your USB drive thickness may also be different requiring you to carve out the inner cavity to fit it in.
In addition, my USB drive has a led where the hole is. If you make one and don't have an LED (which most drives should), fill it in with putty or modify the STL. If your LED is in a different location, modify the STL to work with it.
If you have a double stack USB and use this shell, you can only get 1 USB inserted at a time.
Slightly improved "FINAL" STL updated 4.16.18
NOTE: I TAKE NO RESPONSIBILITY IF YOU RUIN A USB DRIVE TRYING TO MAKE IT!!!!! PERFORM THIS BUILD AT YOUR OWN RISK. YOU HAVE BEEN WARNED!
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
10% +
Notes:
You will need to print support to support the bridging. It will work great without support up to the hole for the LED.
