by TheTempleStore, published
This is a model of the LDS (Mormon) Temple in Manti, UT.
Our models are not to be used for commercial purposes.
We want as many of these printed as possible. Please, print them for yourselves, your friends, your family members, etc. and post pictures of how they turn out!
Rafts: Doesn't Matter
Supports: Yes
Resolution: 100 Micron Recommended
Infill: 20%
Notes:
It works best when scaled up, I believe I scaled to 125-130% for the model in the picture. You may be able to pull off smaller sizes and still capture all the details with a fine-tipped nozzle (.25-.35mm)
Support Removal
It would be prudent to be a little extra careful removing support materials from this one, especially on the steeples.
Tidbits
Had to be a little creative, the actual building is built into a hillside so the entrance is halfway up the building as a result. Rather than trying to incorporate and organic hillside into the model (though I have done it before), I figured this would be the next best thing and would be a little easier to print since the model is pretty complex and detailed already.
