Original Design Wonder Woman
I wanted to print Lego characters that are 2 times normal size,
Putting on the arms I use a little veg oil on the body holes,
the arms will go in with a bit of pressure and rotating.
use supports on the head, but you can delete supports for the inside of the head.
use supports on the hair (prints upside down).
There are 3 different style legs A, B and C, check pics and choose which to print
A type : multicolor solid print, I used red until 11.5mm then yellow until 12.3mm
then flesh until 18.8mm then Blue
B type : print each one in the color listed then glue together
C type : print each one in the color listed then blue together
Torso : Girl Shape 5 is provided in a solid version and a split where the chest will be glued to the torso. the torso is a multi-color print : Blue until 3.8mm, yellow until 7.7mm, red until 13.6 mm
Face: I use Sharpie markers black and red.
Arms: start with yellow for 6mm then switch to flesh.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
.14mm
Infill:
20
