Sort of Dragon /- Dinosaur - Mixture (?) sculpted in Blender 3D.
Rafts may be helpful, but i thing it could be
printable - depending on settings/filament... - without any.
Printer:
Anycubic i3 MEGA
Rafts:
Yes
Supports:
Yes
Resolution:
0.1 mm
Infill:
20 %
Notes:
Hotend Temp.: 200 °C (392 °F)
Heatbed Temp.: 50° C (122 °F)
Print Speed : 50 mm/s (3000 mm/min)
Filament : Janbex Line 2 PLA Green
Slicer: Cura 3.3.1
Model was scaled to a height of 70 mm.
