by Lizard_Wizard

A great classic game you can 3D print!  Great for a gift.
Get 4 of your colours in a row. Any angle.
I hope you enjoy this print.  It should be easy enough to print.
Do not use supports (lengthy clean up if you do:)

I encourage you to design your own discs!
The diameter is 18mm and thickness is 2mm
21 for each player.

I recommend you print on a raft for the Slots object.

When finished print..There might be light stringing.  You may need to encourage the discs to fall.  This goes after a couple of plays.

If you can post a print you did of it, that would be great.

Print Settings

Printer:                      

Anycubic i3 MEGA

Supports:                      

No

Resolution:                      

.3

Infill:                      

12

Notes:

The resolution is not too important.  .3 works well.  I printed a .2 version for myself ;-)

Base takes about 3.5 hours (skirt)
Slots takes about 4 hours (raft)
Discs (skirt)
You can simply multiply the discs; 21 for each player.

Post-Printing

When finished print..There might be light stringing.  You may need to encourage the discs to fall.  This goes after a couple of plays.

How I Designed This

I designed this in Fusion 360.  I consider myself a beginner but getting used to it the more I use it.