by bpitanga
Wigglers are a species resembling large real-world caterpillars. They first appear in Super Mario World, where they are yellow and slowly moving when calm, but turn red and run angrily about quickly if jumped on. Wigglers, in all their types are easily identifiable by the characteristic flower or other plant growing from their head, which can lose their petals if Wiggler are enraged. https://www.mariowiki.com/Wiggler
This is a multi-color print. Print each part in the right color and glue then afterward. There is no need to paint anything.
The trickiest thing about this model is to keep track of the reasonable number of similar pieces. To help on that I engraved ids on the following parts:
body parts, being 1 at the front, behind the head, and following until 4, at the back. The arrows point towards the front.
shoes and shoe soles. Those have numbers 1 (front) to 4 (back), followed by the letters "L" (left) or "R" (right). Be aware that the engraved characters under shoe parts are backward.
The legs are very similar among themselves but, due to the lack of space, I couldn't engrave ids on them. Take extra care to not mix them up.
Assembly tips
Glue the legs to the body parts.
Glue the shoes to the legs and glue the body parts, one to the other, using the connectors. Use your time to align all those parts so the horizontal feet (one in each body part, alternated) are aligned to the ground.
Glue the shoe's soles.
Glue all the rest.
There are two versions for the head. One in a sole piece (may demand supports) and other in two pieces (no supports required but you'll end up with a seam mark).
Let me know if you have any questions.
Regards!
Rafts:
No
Supports:
No
