by 3djourney
Greetings. I've been working on this one for quite some time, and I hope you enjoy the print.
I modeled Gandalf in Zbrush, and the printed model examples are printed at 100m, and I'm sure you could squeeze out more details from the original STL if you print bigger.
I also sprayed the print with white primer to bring out some of the details.
Have fun!
Printer:
Sindoh 3DWOX DP200
Rafts:
Yes
Supports:
Yes
Notes:
Some basic settings that I used:
Layer Height: 0.20
Nozzle Temperature: 200
Supports: Only for the shoulders
Print speed: 40 mm/s
Sprayed with white primer to bring out some of the details
Sprayed with white primer to bring out some of the details
