by skitcher
This is a fidget spinner that uses 6 5mm x 30mm metal rods as weights. I used some tent stakes and sawed them to about 30mm in length.
Based off Ragnarök - Fidget Spinner - Tri-Spinner by MoltoMiller. :D
Pictured next to my Tri Fidget Spinner.
See the Fusion 360 file for how I designed it.
Parts Needed
6 metal rods with a 5mm diameter and a length of about 30mm
3D printed spinner
Caps (optional)
1 608 bearing
Glue (optional)
The holes for the rods are 5.1mm in diameter, and the bearing hole is exactly 22mm.
How to Assemble:
Insert bearing and rods into spinner. Glue if needed.
Insert caps if desired. Glue if needed.
Done! :D
