by enimaker
this is my version of a classic top printed in 3d.
I recommend installing a fairly heavy steel tip and my test tip attached because it breaks easily and does not work very well.
the tip must have a square-shaped attack 5.6mm x 5.6mm x 15mm.
Max diameter : 70mm
Height without tip: 72.5mm
Video: https://youtu.be/7YABPyCY86k
Printer:
Eniprinter
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10-20
Notes:
the supports can also be avoided
