by ElTacoLoco

Undead (Scourge) Warlock with Tier 5 PVP Gear (Corruptor Rainment)
STL file is repaired and testprinted so works good with those slicer softwares i have tested and the file should be water tight.

This is a extract from a friends wow character.

There will be a V2 when i'm done remodeling the STL to be easier to print.
The file can be hard to print due to overhanging parts and many smal items with FDM printers but it's possible with a lot of support material (water soluble filament can be a good idea).
I recommend scaling the print up maybe 200-300% depending on what size you want, i printed it at 200 micron (0.2) layer height on 200% upscale but next one i'm printing i will use 100 micron (0.1) layer height  since a lot of detail got lost with 0.2 layer height.
Works good at 0.2 layer height with 0.4mm nozzle but depending on how much you scale it up you might want to use a smaller nozzle.

Don't print the file to smal since there are a lot of thin structures and it can be hard to remove the support without breaking of the arms.

Print Settings

Printer:                      

3KU Delta

Rafts:                      

Yes

Supports:                      

Yes

Resolution:                      

100 micron (0.1mm)