by koko508
In the picture you can see the model printed at 50% scale.
Bearings for 100% Scale:
1pcs. 6300
1pcs. 608
Bearings for 50% Sacle:
1pcs. 619
1pcs. 625 (then its 1,5mm smaller in the outer diameter) or 635 (then its 1,5mm bigger in the outer diameter)
You will need 3 pieces of the Rotorblätter.
Printer:
Evo-Lizer EL-11
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
30%
Filament: - ABS
