by yeg3d, published
It's Alive! Planning a Halloween party this year and want to showcase your 3d printing skills? Then we have the model just for you. Print Frankenstein's Monster during your party and start the print early so that during your party it will be printing his brain! This is the perfect decoration for your home this Halloween.
Oh and did I mention this model is printable without support!
Rafts: No
Supports: No
Resolution: 250
Infill: 8
Notes:
Make sure to cut off the bottom in your slicer to ensure a flat bottom. Also make sure your model has at least 8% infill or more to guarantee there are no holes in the top. Printed on a Type A Machines 2014 Series 1 3D Printer Printed with Real Orange PLA from 3D Solutech Printed without support Printed with a brim, 20 lines 250 microns (0.25 mm layer height) 160 mm Height (7.5 inches) 8h Print Time 0.8 mm Shell Thickness 8% Fill Density 80 mm/s Print Speed 0.4 mm Z hop when retracting 44.46 m of filament used 230C Print Temperature 4 mm Bottom cut off Sliced with Cura Modeled with Z Brush
Finish It!
As per usual, here at YEG 3D, printing a model is not all there is to producing a finished product. Paint it, glitter it, or finish it in any way you see fit. Just be sure to post pictures of your finished product!
