by LarryOmalley
my second try, worked out better. if your plastic base is bigger then your top half, you will have a 80% success rate helping the base of your object to stick to your base plate.
temp :210
bp temp : 50
speeds 30
and 20 varied.
resized to only 50%
make -10 on z axis
slower speed = better detail
this was a 17 hour print,
Printer:
Qidi X-pro
Rafts:
Yes
Supports:
No
Resolution:
.20
Infill:
20 %
Filament: esun blue PLA esun blue