by Mag-net
The Silent Hill Nurses inspired by the video games and movies.
In order to print these, you'll need supports! I would also suggest decreasing the print speed. This will go a long way to improving the print quality. Each nurse took around 16-19 hours to print and they measure about 180-200 mm tall.
This is not an easy print as the fingers and arms are so delicate. I had one arm fail during the print. I finished the print, cut off the bad arm at the sleeve, and reprinted just that arm.
1 - Removed and clean up supports.
2 - Primed using Rust-oleum Primer-Filler. Two coats.
3 - Wait 24 hours.
4 - Sand, sand, sand, give up.
5 - Airbrush, wash, paint, airbrush, paint, wash, give up:)
