by vfxforge
This is the last set of creepy pumpkin heads I sculpted for Halloween. Painted with acrylics. HAVE FUN!!! SET A --> http://www.semaker.com/productdetail/17497
Printed with Peopoly Moai
RAW - STL for all printers. Can be scaled, supports may be needed.
SUPPORTED & Hollowed - @ 6cm height & 1.5mm wall thickness, with tree supports for Printing on SLA / DLP printers.
Come say hi & see my sculptures on http://fb.me/CustomModelsJC
Likes and follows are welcome & appreciated!
