by DorffMeister

Superstar_beki's model didn't fit on my print bed and I didn't like that it was already scaled, so I imported their model into Fusion 360 and scaled the length and a few other things such as adding a joining peg to connect the base and the tip

You should print this with "Supports Everywhere".

This model expects pretty good print tolerances at the nub/notch interface.

(I'm printing for the first time right now, so it's possible I'll edit this in the near future.)

Print Settings

Printer Brand:                          

Prusa

Printer:                          

i3 MK3

Rafts:                          

No

Supports:                          

Yes

Resolution:                          

0.20mm

Infill:                          

40%

Filament:                                            Hatchbox PLA                                        Bronze                                        

Notes:

Sliced with Slic3r.
I extruded at 205 first layer, 205 subsequent laters.

Post-Printing

Align the tip and the base correctly, CA glue the tip to the base.

How I Designed This

Imported model into Fusion 360. Reduced the number of facets to 0.198. Scale by 0.1 to get the correct units (it imported at 10x). Scale the length by 1.04 to get the correct length according to Google.

I sliced the model at the tip of the handle to create a nub on the base and a notch in the tip to make glueing a bit easier. I should have used a non-symmetric shape for the nub (live and learn).