by fasteddy516
For all of the spider-lovers out there, here is one you can print and wear!
The spider's outline is based off of an .svg obtained from Online Web Fonts (https://www.onlinewebfonts.com/icon/562349) and licensed under CC BY 3.0.
I have included two versions of the spider body - one with an indent in the bottom that is meant to mount on a multi-finger ring (or just stand alone), and another with a hanging tab on one end to let it dangle (earring, rear-view mirror ornament, etc.).
Please be aware that this model was not designed to be printed in pieces on a single-extruder machine and assembled afterwards.
When printed at 100% size, the spider measures approximately 60mm by 50mm. The smaller spider in my photos is scaled down (70% on x/y, 85% on z) and measures 40mm by 35mm. If you play with the scaling, be careful how much you shrink it on the z-axis - those legs are thin!
Happy printing!
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: MG Chemicals, 3D Solutech PLA Black (MG), Red (3DS)
Notes:
Be gentle when you peel the legs off the the print bed!
