by kendel3d
This is a simple cat bookmark. I printed it in PLA with a 0.4mm nozzle. There are two versions, one where the cat is 3mm thick and one where the whole bookmark is only 1mm thick so that you can put it inside a book without damaging the pages.
If you like this, you might also like the Cute Bulldog Bookmark.
Printer:
<a href="Go">https://www.gobig3d.com>Go Big 3D Genesis 8
Rafts:
No
Supports:
No
Resolution:
0.4 mm nozzle, 0.2 layer height
Infill:
100%
Filament: Atomic Filament PLA Yellow
