by redxeth
Minor mods I did to creativspelerr's 4 Color Hummingbird Remix since I don't have a multifilament printer.
Changes:
NOTE: Made the bird overall a little smaller (to be more like real one)-- so these parts aren't compatible with original.
Made the beak smaller (took some work in Meshmixer) to be closer to that of real hummingbird, since I was planning to hang it
Added hook to body (provided here both versions, with and without the hook)
Merged eyes into the head. Just had to paint them with acrylic paint (or marker for black) as they are hard to print separately and add back in to the head.
Print tips:
Used Cura 3.6.0 slicer. Used minimum layer time of 15s with 'lift head' feature, to allow small layers to cool a little before printing on top of them
I used 100% cooling fan, up to you, but I found this better for the small details especially in the wing tips.
230C hot end / 95C bed, 100% flow
60mm/s print speed, outer wall 15mm/s, inner wall 45mm/s, top/bottom 30mm/s
30% infill (line pattern)
Post-print assembly:
Printed the parts in ABS separately and glued them together after printing by just dabbing each surface with a tiny amount of acetone.
