by Aria88
Pubg Erangel map. Frames are inspired by original Pubg logo.
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.1-0.3mm
Infill:
10-20%
Filament: ... PLA
Notes:
Use 0,1 resolution for map, buildings and logo.
You can use greater resolution for frames and sea plate.
I recommend to add 1-3mm brim for sea plate, frames and map to ensure good result.
When printing sea plate, be careful after first layer. If using 100% speed it's possible that PLA is not going to stick. I suggest using 60-70% speed.
