by Yann421
Mini compacter. ~1/100 scale.
2 versions of the the main body.
The one piece if you are confident in the strength of your filament, or the 2 pieces with a stronger joint. In this case, you will need to superglue the 2 parts.
Print without support as displayed.
You will need two M2 screws for the drum. I took mine from an old HDD.
One M3*6 for the joint between front and rear and one for the wheels.
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
