by killminusnine

This statuette of an orc warrior from World of Warcraft is still a work in progress because of the difficulty to succesfully print it. I will work on the thin parts thickness to harden them. At Scale 1:1, I have designed it to be 20cm tall to fit in the printing domain of an Anet A8. Of course, you may scale it smaller at the slicing stage to attempt an easier printing.
The complexity of the mesh result is more than 5M polygons, so, the STL file exceeds the 256MB max filesize to be uploaded as is on Thingiverse, then, the STL file is compressed in a zip file and the STL file "dummy.stl" on the root of the archive is only present to make Thingiverse process validates it to upload.

Print Settings

Printer Brand:                          

Anet

Printer:                          

A8

Rafts:                          

Doesn't Matter

Supports:                          

Yes

Resolution:                          

0.2

Infill:                          

40%

Filament:                                            Amazon PLA                                                                                

Notes:

This statuette is a very high definition one, so it is very difficult to succesfully print it. Because of the details, printing resolution must be high (0.2mm for instance). Hanging draping clothes are thin, then the infill parameter must be high too (40~50%). With the pedestal, no need to active raft. Because of hanging parts, supports activation is mandatory.