by Ofizzjiggo
Hanging vacuum tube lamp. print and snap together, center pin needs to be glued in and 6 of the smaller pins must be printed. This lamp uses a Glass Clock Dome - 4" x 7" and an ikea strala light. in addition you will need a glass drill bit to pass the cord through the top of the dome. You will also have to disassemble the light housing to get to the wiring connection Drill a cord sized hole in the glass and plastic plate top, and feed the wire through then re connect the wire to the light
https://www.hobbylobby.com/Crafts-Hobbies/Glass-Crafting/Glass-Containers/Glass-Clock-Dome---4%22-x-7%22/p/28845
https://www.ikea.com/us/en/catalog/products/90371505/
