by Wolfgard
This model is totally transformable, without dismantling or changing parts.
This was a long project. Very tiring.
I decided to publish this project for free, but if you appreciated my efforts and you are passionate, you could make a small donation. I would be extremely grateful.
For donations: PayPal - 75massi@gmail.com
For this model I do not recommend the use of simple PLA
I recommend the use of PLA Plus or ABS
If made with PLA Plus, I recommend using 80% infill. If ABS even less
Inside the zip, you will find the PDF of instructions and various tips
If you encounter problems contact me, I will be at your disposal
