by MastodonFarm
Larger version of cerberus333's fantastic tiki totem, scaled up to fit the 100mm max width of my printer, then sliced into three pieces to make it fit on the Z axis. The plugs are optional; you can use them if you don't want to glue the pieces together, but I found that having them in there left a slightly wider gap between the pieces.
Printer Brand:
Monoprice
Printer:
Mini Delta
Rafts:
No
Supports:
No
Resolution:
0.28 mm
Infill:
15%
Filament: TronXY PLA / Wood Woodfill
