by T1ckL35
Super kudos to TigerAce1945 for some amazing free models.
This is a breakdown of the KV-1 1941 model into more parts. This is mainly so that the tracks can be printed at speed at 0.2 layer height at 80mms (they always get caked in mud so never need to look super pretty ;) and the other parts can be printed at a higher quality and then put together. Also fixed a slight misalignment on one of the bumps on the front right of the hull.
I've used the full tank split file and printed off separate parts in different resolutions as required. Each of these parts has been uploaded individually too for ease. I've also uploaded a 'partial-split' version where the plates behind the tracks have been added to the main hull so they don't need sticking on afterwards
Recently finished printing so the base coat is still drying in the pictures
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.08 through to 0.2 depending on the part
Infill:
various
Filament: Generic PLA Red
Notes:
The underside of the cannister on the sides will probably need a very small support otherwise it starts agging (not visible in the pictures)
