by Michael_73
I heavily remixed the model, removing all the air powered components and replacing the wheels with those from the Ford Mustang model. I then combined them with an axle and changed some sections so it could be printed on its side.
Due to the cobra's large side skirts, I made one model that sacrifices much of them so that the first later is a large flat surface, and another that preserves most of them, but requires bridging for the door section on that side. The pictures are of the model with bridging, but if you have bridging or adhesion issues, print the "EzPrint" model.
Print with no supports, as oriented, and a 0.2mm layer height worked for me.
