by SconNL
Hello all,
This is a design that is made to work with the Eaglemoss Back to the Future 1:8th scale DeLorean. I designed it around the electronic flux board that can be ordered from Modelmodz.com. To be able to print this, your printer must be able to print on 0.05mm accuracy and even then the small parts will be challenging to make. If your looking for an even more detailed model, you can acquire that from Modelmodz.com as well or from 3Dynamics om Shapeways.
Furthermore you will need steady hands and patience in assembly and painting.
For the glass I simply used a piece of transparent sheet. The stickers I printed on photopaper as small as possible. After cutting the paper make sure to colour the sides of the stickers red.
I put an advice in each file name in regard to the use of brim/ support (from the build plate up) and also which parts to print in neutral clear filament.
If you make a flux capacitor with this design please post your work here at Thingiverse, it is much appreciated. Obviously this design is free of charge, but if you like it a small tip is always welcome ofcourse.
Enjoy!
Printer Brand:
Prusa
Printer:
Rafts:
Yes
Supports:
Yes
Resolution:
0.05
Infill:
solid (70%)
Filament: Real PLA varies
Notes:
note: there is a bit of clearance on the top half of the backplate, in my build I filled that up with a piece of black filament coming from an additional rubber that I printed.
