by berrine
You must make sure that the edge of the blade is facing upwards.
v8 should have a large area down.
You need 18 pins (you can use any kind of 2mm diameter things) (length : 18mm)
I am not good at English. sorry... :(
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
knife 50%, handle 25%
Filament: .. PLA white
Notes:
You must make sure that the edge of the blade is facing upwards.
v8 should have a large area down.
