by sparx

Needed a couple of Stylus holders for my desk that fitted with the theme of my models . . a bit risky so if offended don’t download . .
This one modelled for my Wacom stylus 10mm thick, , 2 versions one piece and a two piece print . .
If you wish to scale up/down then print out the pen holder.stl and scale up till you get the size of your pen, if you scale up 10% then load the full model and scale that to 10% then it will be correct size
No instructions really needed for this one but take a look at the slicer pictures , full model angled 12 degrees, ensures no supports on face, and less supports used  . .
Also print with very high fill at 60% minimum as the hair hands are the main support for the model!
Now the models are explicit and have high detail, and could be displayed with a solid pole rather than a pen so scale up to 80-100% is possible . .
All the parts have been printed and developed to print! The pelvis modified 2 times in total of the 3 alternatives, and in the end prints better with the legs separated. All pieces have been tested and they print out very easy as long as you follow the settings in the PDF file .

All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .

People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds . This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.

see above and pictures of slicer orientation