by HappyMoon
This bust was modelled based off of the Hot Toys bust found at: http://www.hottoys.com.hk/productDetail.php?productID=374.
The 'HelmetMain' and 'Faceplate' files are for a wearable helmet which has an inside width of around 16cm ear to ear, so it may require additional scaling.
The 'LED' files are another version of the normal bust, however they contain additional holes/channels to insert LEDs - the final bust is around 15cm tall, so it may be easier to assemble if printed slightly bigger. The 'Lens' files are designed to be glued over the eyes/arc reactor and should hopefully diffuse the light from the LEDs if printed in a white or clear filament.