by DogeWow98
Hey! Before I get started I just want to mention that this is the first 3d model I've ever made. I made it because I needed a way to mount my PS4 Pro to my wall.
I tried looking in every 3d printing website but only found mounts for the PS4 or mounts that would only work in wood/drywalls and looked way to fragile. I'm not trusting my PS4 on a weak mount.
I know the design is a bit weird and I know there are many more out there that look way better but this is what I was capable of doing as I'm very new to the 3d printing world and decided to share it with everyone.
Feel free to make any changes to it if you think you can improve it. For example, the small ridges that go inside the PS are a bit too big, I just sanded it a bit and it works flawlessly.
Also, sorry for any grammar mistake as english is not my main language. Hope you like it!
Just print this in any way you like. I believe it can be printed on any printer out there as it is smaller than most mounts, and my printer is one of the smallests out there as well. Use any settings as you probably know a much better way to print this than I do. I printed it with supports for the screw holes as I didn't want to risk a 4h print to go to waste, plus they come off really easily.
You can mount this on any type of wall I believe, I used an 8mm anchor(? I think this is how you say it in english) on a brick wall, the screw head was about 1cm and the screw itself was around 0.5mm
