by hlyman
My Temples are designed from photos, therefore they are not exact in dimensions.
Printer:
LymanBot
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
5%
Filament: EBAY PLA White
Notes:
I print most Temples with 2 perimeters, 2 bottom layer and 5 or 6 top layers @ 50mm/sec.
I use CA glue to attach the Angel Moroni. You may have to scale the angel to a size to fit the temple.
If you print the temple at a scale where axis X = 120mm, then the angel should be printed at a scale for the Y axis at 13mm.
