Prusa MK3 and MK2 users should download the premade optimized gcode. Simply add to SD card and print. Same gcode as imaged print, it will take 40 hours total. Before someone asks; yes the gcode will work on MK2 and MK3, tested everything on both printers. MK2 max height is really 205mm not 200 and the max height of these prints are 203mm.
Instructions after printed:
1) glue parts together
2) glue sponges inside dome for your head
3) insert nylon filament into hinge mechanism, cut and melt ends of filament.
Filaments used:
Gold from botfeeder
Silver from Prusa
Red from Filaments.ca
Nylon from Spool3D
