by TK14082
This is a newer version of my E11 blaster from Star Wars Episode IV: A New Hope. This version includes a moving trigger and selector switch, which will require (2) common ink pen springs. I have also redesigned the alignment tabs that join the receiver tube parts, giving you an uninterrupted inside diameter of the tube. Note that I have also included an assembly drawing in PDF format to help you see where everything goes and what needs to be printed. The trigger guard is now separate from the grip assembly, giving you the option to make your own metal trigger guard. You also have the option of making your own metal scope rail, if you wish. You may also wish to provide your own hardware: (3) 1/4-20 x 3/4 socket head screws for the muzzle and grip, (1) 1/4-20 x 3/8 socket head set screw for the magazine well, and (1) #6 x 3/8 flat head screw for the scope rail. Otherwise, you may elect to use the printed hardware. I have also slightly reduced the outside diameter of the bolt to give a little more clearance and a better sliding action through the receiver tube.
