by m_bergman, published
Since it has become obvious that most people are printing my 1:200 tanks for wargaming, I decided to redetail some of them to suit the scale. A secondary consideration was to ensure that the details would still be printable on my Form 1 SLA printer at 1:200.
These tanks are designed for EXPERTS only. If you don't already know the answer to your questions, please go instead to the 1:200 sets, which are much more forgiving to print.
1:200 tanks pack 1: http://www.semaker.com/productdetail/885
Printed at 0.2mm layers, 0mm support limit, 80degree support angle in ABS on UP plus 2.
These models will be added to, on a random schedule.
Current vehicle list:
Germany:
Tiger I mid
Tiger II (P)
Tiger II (H)
Panther D
Panther A
Panther G
Jagdpanther
Jagdpanzer IV
Jagdpanzer IV L70
Pzkpfw 35(t)
Pzkpfw 38(t) Ausf A
Pzkpfw 38(t) Ausf B & C
Pzkpfw 38(t) Ausf D
Pzkpfw 38(t) Ausf S
Pzkpfw 38(t) Ausf E
Pzkpfw 38(t) Ausf F
Pzkpfw 38(t) Ausf G
Aufklarer auf Fgst Pzkpfw 38(t)
Pzkpfw III L
Pzkpfw III M
Pzkpfw III N
Pzkpfw III flamm
Pzkpfw IV G
Ferdinand
Elefant
E-100
LWS (Landwasserschlepper)
Sdkfz 250/B1
Sdkfz 250/B8 stummel
Sdkfz 250/B9
Sdkfz 251/D1
Sdkfz 251/D1 stuka-zu-fuss
Sdkfz 251/D9 stummel
Sdkfz 11
Sdkfz 9 Famo
Sdkfz 9 Famo with spade
Opel Maultier
Kubelwagen
Morserzugmittel 35(t)
Belehlpanzer 38H
Munitionschlepper 38H
Pzkpfw 38H 735(f)
Pzkpfw 38H 735(f) with wurfrahmen
Pzkpfw 35S 739(f)
Leopard 2A4
Leopard 2A5
Leopard 2A6
UK:
Rolls Royce Armoured Car (1914 & 1920 pattern)
M3 Stuart (UK)
M3 Stuart Hybrid
M3 Stuart Recce
M3A3 Stuart
M3A3 Stuart Recce
Centaur
Cromwell
Sherman V
Sherman VC Firefly
Matilda II (BEF)
Matilda II
Matilda II CS
Valentine I
Valentine II
Valentine III
Valentine IX
Valentine XI
Bishop
Archer
Universal Carrier
Bren Carrier No2 Mk1
M5 halftrack
M9A1 halftrack
LVT-4 (armed, armoured)
LVT-4 (armed, armoured) with Polsten cannon
Staghound I
Staghound II
Staghound III
Staghound AA
Centurion III
Centurion V
Centurion AVRE
USA:
M2A4
M3 Stuart
M3A1 Stuart
M5 Stuart
M5A1 Stuart
M4A3
M4A3-76
M4A3-105
M4A3 HVSS
M26 Pershing
M45 Pershing (105mm)
LVT-4 (armed, armoured)
Jeep
Jeep with .50cal MG
Jeep with .30cal MG
M4 HST class A
M4 HST class B
Russia:
IS-III
T-34 85
SU-85
SU-100
SU-122
BA-3 armoured car
BA-6 armoured car
BA-10 armoured car
BA-10M armoured car
Komintern tractor
Voroshilovets tractor
STZ-5 tractor
B-4 203mm Howitzer
M17 halftrack
T-54
T-55
T-55A
T-62
T-72A
T-72M1
T-72B
T-72BV
T-72BM
ZSU-57-2
BMP-1
BMP-2
BTR-60P
BTR-60PA
BTR-60PB
Hungary:
Toldi I
Toldi IIa
Nimrod ( & L62)
Turan I
Turan II
Turan III
Zrinyi II
Csaba Armoured Car
Romania:
R2
TACAM R2
Bulgaria:
T-11
Japan:
Chi-Ha
Shinhoto Chi-Ha
Ho-Ni
Ho-Ro
Shi-Ki
France:
Hotchkiss H35
Hotchkiss H38
Hotchkiss H39
Somua S35
New Zealand:
Bob Semple Tractor Tank
Beaverette Mk2
NZ Pattern Wheeled Carrier Mk2
Bren Carrier LP1
Bren Carrier LP2
Staghound I (NZ)
Staghound II (NZ)
Stuart Hybrid
Australia:
Matilda II (Aus)
Matilda II CS (Aus)
Matilda II Frog
Centurion V (Aus)
Centurion V (Aus) Dozer
Vehicles are reworked versions of my 1:200 tanks. All models drawn in Solidworks. Parasolid versions included in the zip files
All vehicles printed sitting on their tracks. All turrets printed with their guns horizontal.
Printed at 0.2mm layers, 0mm support limit, 80degree support angle in ABS on UP plus 2. Obviously a finer Z resolution would look better, but it's a matter of time-to-print which determined my choice.
Sdkfz 250-b1 printed with 45degree support angle to prevent the inside being filled in with support structure.
I advise that you in all cases clear out the support from between the tracks underneath the vehicle first. This will enable the outside support structure to be levered off without too much trouble.
In cases where the support doesn't want to come free, cut carefully down through the supports beside the model with a sharp xacto knife to break the support.
Printing on the Form 1, I sat the vehicles and turrets up on their tails, set contact points to 0.5mm. Just keep an eye on where Preform places the contact points, because sometimes the positions are less than optimal, and need to be edited...
