Summary

This is a remix of Braq that allowed me to print my own on a Polyprinter using ABS.

Most of the parts remain unchanged, but the ones that proved difficult for me to print have a 1 mm base and a 1 mm airgap (to be filled with support material) below them.

This is preferable to using a brim, as I found that a standard brim directly on the 'problem' pieces was difficult to remove.

Print Settings

Printer: PolyPrinter 229

Rafts: Doesn't Matter

Supports: Yes

Notes:

Limit the height of the supports. The built-in supports in the designs should be able to handle the dragon itself.