by xz305913316

Slice needs to be enlarged to 2550%

This is the first time that I have made RC Tank experimental works. There are many shortcomings, please forgive me

The picture is a long time ago, the type 59 record was made. This t34-3 file was modified from the type 59 file, adding details and improving the number of turrets.

Need:

Gearbox of Henglong tank

M3 screw (various lengths)

Outer diameter 4mm inner diameter 3.4mm long 2cm steel pipe 10

Outer diameter 3.2mm inner diameter 2mm long 2cm steel pipe 10

Length: 12cm, diameter: 1.5mm, 10 steel wires

The t-34-3 is a variant of the t-34-2 tank. Unlike the 59 tank, the armor is thinned. The project started around 1957, but was eventually terminated because the mass production of 59 tanks started at the end of 1958.

In the 1950s, the people's Republic of China planned to significantly improve the t-34-2 tank. This kind of tank is called "t-34-3" tank. But because China got the design drawing of t-54a from the Soviet Union, the military lost interest in the tank, and the plan was abandoned

这是我第一次制作RC坦克的实验作品  有诸多不足 请海涵

图片是很久之前制作59式的记录， 这次的T34-3文件是在59式文件上修改而得来的，增加了细节 同时改善了炮塔面数。

需要：
恒龙坦克的齿轮箱
M3螺丝（各种长度）

外径4MM 内径3.4MM   长2CM钢管10个
外径3.2MM  内径2MM  长2CM钢管10个
长12CM 直径1.5MM钢丝   10根

T-34-3是T-34-2坦克的变型，与59不同的是减薄了装甲。该项目于1957年左右开始进行，但最终因为59坦克量产工作在1958年底开始，而被终止。
中华人民共和国曾经于50年代计划对T-34-2坦克进行大幅改进。这种坦克被称为“T-34-3”坦克。但是因为中国从苏联那里拿到了T-54A的设计图纸，所以军方对这款坦克失去了兴趣，方案也随之被废弃不用