by DaakTwo, published
Hi all, I Bought a Ribbon of 5 colors 22 awg wires and I splitted the ribbon Into 5 separate wires, I needed some kind of small spool to put those wires on and so I designed this spool....to minimize the support I separated the spool in 3 parts, side disks and shaft, to assemble them I used ... #14-3/4" Wood Screws, I also did 3 holes in the shaft as a locking starting point to put the wire in as well as in the disk I did 8 holes to again lock the wire when not using ,For those that wonders the length on the spool as of now you see 20 meters of 22 awg on each color spool, Enjoy
PS : I will be doing a rack soon to put those spools on
