by vbldv
Cherry model
To print the stem please see the horizontal orientation shown in the image, use supports with brim and use 100% infill
The designed way to attach the stem to melt the stem end with a tip of soldering iron and then press the molten tip into the cherry. This will create a realistic connection just as on real cherries
To allow the cherries to stand in the desired position you will need to flatten the bottom of the cherries, you can do so by placing the model in the desired position and slightly lower it BELOW the printing surface, lowering it by -1.5 or -2 mm is enough to make it stand. The slicer will stitch and flatten the area just above the printing surface
In order to get a realistic end of the stem fork, you can use a soldering iron to melt and shape the end to the desired shape
