by fasteddy516

After weeks of swearing that my printer would not be used as a tool to support my wife's "Baby Yoda" obsession, I have finally caved.

This is a remix of jamesjenuwine's Baby Yoda model, that has been cut into separate pieces for multi-colour printing.

Please be aware that this remix was not designed to be printed in pieces on a single-extruder machine and assembled afterwards. Use jamesjenuwine's original model to get everything at once in a single colour.

The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU in two steps as follows:

Step 1:

• by_ears.stl Neat Filaments Silk Pink PLA (extruder 1)

• by_eyes.stl MG Chemicals Black PLA (extruder 2)

• by_head.stl Neat Filaments Light Green PLA (extruder 3)

Step 2:

• by_cloak.stl Neat Filaments Bronze PLA (extruder 1)

• by_neck_cuffs.stl Prusa Ivory PLA (extruder 2)

• by_hands.stl Neat Filaments Light Green PLA (extruder 3)

Printing the head and body separately saves on support material required for those massive ears, and let me use five colours for the final print.  If you have a printer that supports more than four colours (or just drop a colour somewhere) you could print it all in one go.

I printed it scaled down to 25% (the original model is huge!), which measures roughly 68mm x 37mm x 58mm.

Happy printing!

Print Settings

Printer Brand:                          

Prusa

Printer:                          

i3 MK2 MMU

Rafts:                          

No

Supports:                          

Yes

Resolution:                          

0.2mm

Infill:                          

10%